Categories
Cycling Lakewood Sister Cities

Paris to Hayling Cycle Ride 2006

Day 1: 2006-07-09 Cycle out of Portsmouth

 

Day 2: 2006-07-10 LaHavre to Evereaux

Day 3: 2006-07-11 Evereaux to Chartres

 

Day 4: 2006-07-12 Chartres to Paris

 

Day 5: 2006-07-13 Paris to Rouen

 

Day 6: 2006-07-14 Rouen to Diepp

 

Day 7: 2006-07-15 Deipp to Hayling Island

 

Day 8: 2006-07-16 Depart Portsmouth Arrive Denver

Categories
Uncategorized

PAP2 Configurations

Using the PAP2T and PAP2-NA with VOIP.ms

Provisioning:

Provision Enable: No

Regional:

Daylight Savings Time Rule: start=3/8/7/2:00;end=11/1/7/2:00;save=1

Line 1/2:

NAT Mapping Enable: Yes

Proxy and Registration:
Proxy: denver1.voip.ms
Register Expires: 180
Proxy Fallback Intvl: 180

Restrict Source IP: Yes

DTMF Tx Method: INBAND

Dial Plan:
( 911S0 | [2345678]11 | *xxx. | <:1>[2-9]xx[2-9]xxxxxxS0 | 1[2-9]xx[2-9]xxxxxxS0 | 011[2-9]x. | [#*x][*x][*x][*x][*x][*x][*x][*x][*x][*x][*x][*x]. )

911S0: Dial 911 immediately
[2345678]11: Dial other info services
*xxx.: dial 3 digit internal extensions without delay
<:1>[2-9]xx[2-9]xxxxxxS0: 10 digit dialing WITH a 1
1[2-9]xx[2-9]xxxxxxS0: 10 digit dialing WITHOUT a 1 (like cell phones)
011[2-9]x.: International dialing starting with 011
[#*x][*x][*x][*x][*x][*x][*x][*x][*x][*x][*x][*x]. everything else up to 12 digits

Works for me:
Waveform: Sinusoid
Frequency: 25
Voltage: 70
Suggested for US:
Waveform: Trapezoid
Frequency: 25
Voltage: 80

User 1

Message Waiting: Yes
Secure Call Setting: Yes

Categories
CoolScan

Using NikonScan on Windows 64 bit

Here is the updated INF driver file for Nikon Super Coolscan film scanners for Windows 7/8/10 64-bit:

NikonFiles_v1-4.zip

Based on instructions and files located here for Windows 7 x32/x64 and above, I have updated the instructions:

  1. Note: If you have an LS-4000 you will need to ensure it has the latest firmware V1.10 in order to run Nikon Scan 4.0.3. You will need Nikon Scan 3.1.2 and a Windows XP machine to do this. You may be able to run “XP Mode” (a virtual XP machine) inside Windows 7.
    1. Run Windows XP
    2. Download and Install Nikon Scan 3.1.2.
    3. Download and extract the LS-4000 Firmware Updater.
    4. Follow instructions in the PFD in the ZIP file.
    5. Run the SUPERCOOLSCAN4000ED_110.exe file.

Now, let’s get your scanner working in Windows 7, 8, or 10:

  1. Remove Vuescan if installed. You can re-install it after these procedures.
  2. Download the Nikon Scan 4.0.3 scan software for Windows Vista 32-bit.
  3. Install Nikon Scan 4.0.3.
  4. Download the modified scanner driver here – NikonFiles_v1-4.zip
  5. Extract and save the NikonFiles folder to
    C:\Program Files (x86)\Nikon\NkScan4\
    The NKScan4 folder now contains the NikonFiles folder and will look like this…
    C:\Program Files (x86)\Nikon\NkScan4\NikonFiles\
  6. Windows 7: skip to step 8.
  7. If you’re running Windows 8/10, you’ll need to temporarily disable the driver signature enforcement policy (option 1) prior to next steps or the scanners_v1-4.inf driver will not install.
    1. Press and hold the Shift key on your keyboard and click the Restart button.
    2. Choose Troubleshoot > Advanced options > Startup Settings and click the Restart button.
    3. When your computer restarts you’ll see a list of options. Press F7 on your keyboard to select Disable driver signature enforcement.
    4. Your computer will now restart and you’ll be able to install unsigned drivers.
  8. Power up the scanner and connect the Firewire or USB cable to the computer.
  9. Cancel any dialogue boxes looking for drivers if they appear.
  10. Go to Control Panel > System > Device Manager and look for the “Unknown Device” (your scanner) with the yellow triangle.
  11. Right click on it and choose “Update Driver Software” then choose “Browse my computer for driver software”
  12. Click “Browse” and find the folder C:\Program Files (x86)\Nikon\NkScan4\NikonFiles and click “Next”.
  13. That’s it – Your Nikon Scan software should now be fully functional.
Categories
CoolScan Projects

Hello world!

Welcome to WordPress. This is your first post. Edit or delete it, then start writing!